Ecological and sustainable choice
Make a sustainable choice and choose a standard room with R290 refrigerant. Choosing a refrigeration appliance that uses natural hydrocarbon save energy costs, and is also kind to nature.
In tests up to 33% of electricity consumption reduction has been achieved. This brings Porkka modular cold rooms and freezers users considerable savings in operating costs over the entire life cycle of the equipment.
R290 refrigerant has a very low climate (GWP 3).
Reliable and secure
The Porkka temperature display is supplied with a built-in high/low temperature alarm which is both audible and visual and can also be connected to a building management system by means of a volt free connection.
HUURRE ITOP temperature management system
Connection to the Huurre ITOP temperature management system enables remote monitoring of temperatures in accordance with the requirements of OIVA, even when you are not working. ITOP anticipates the possible fault conditions, submits the necessary reports and sends alerts if necessary. You can connect the system to your existing equipment, regardless of manufacturer.
Various door options
The doors are supplied with durable hinges. Each door is equipped with a lockable door handle having an internal security that bypasses the lock, removing the requirement & cost of a trapped personel alarm. Doors are available left or right hinged (to be specified at time of ordering) and pre mounted in the panel factory.
Standard door width is 700mm. The smallest standard rooms supplied have a 550mm wide door and there are options for 900 or 1000mm doors for larger rooms. Freezer room doors have a heating element that prevents the door gasket freezing. Room sills and edges are made of solid stainless steel.
To facilitate the use of trolleys, chiller rooms can be supplied without a floor. In this instance, the room is erected on an insulated plinth and the door equipped with a sweeper gasket. Medium and low temperature rooms must always be supplied with a floor. In either case, the doors are fitted with a sweeper gasket.
Central Cooling (CC) System -ready
Standard rooms can be equipped with central cooling system connection. In this case, the required connections to cooling unit’s electrical and plumbing devices are already at the factory installed.
With CC-ready model the generated heat is transferred away from kitchen. It is also very silent in operation.
Compared to traditional central cooling system room solutions and enables energy-saving, lower room design solutions from an altitude of 2100 mm.
The hygiene is enhanced by the fact that there is no need to install drainage in the room and the installation of the lighting fixture and other equipment has been done so that cleaning is easy.
The standard room is available with various flooring options. Cold rooms can be provided floorless In this case, the wall panels are installed on top of an insulated surface and the door is equipped with a sweeper gasket.
Medium temperature and freezer rooms are always delivered with an insulated floor. An optional ramp is available for trolley access, alternatively the floor can be recessed. Freezer Rooms are always equipped with underfloor heating which helps prevent moisture damage to the freezer room.
Insulated floors are coated with an anti-slip glass fiber. The standard floor load capacity is up to 40 kN / m2 or 1.0 kN / 40 mm wheel. Options include a reinforced floor with a stainless steel surface.
The Porkka modular cold room shelving system is highly practical and easy to clean.
Standard shelving includes four (4) tier dishwasher safe polycarbonate (food safe) inserts and supporting material. Shelving is supplied for either 2 or 3 walls dependent on model selected.
HACCP (Hazard Analysis and Critical Control Point)
Versatile, built-in HACCP (Hazard Analysis and Critical Control Point) – with the optional XDL-01 monitoring device which enables continuous and real-time temperature monitoring, that can be downloaded via a USB stick (complies with the European Food Act being implemented by many governments).
Porkka Remote Heat Disposal System (RHDS®)
The RHDS system is similar to the standard Porkka unit with the addition of a liquid condenser, header tank and pump. Water pipes are then connected from the remote condenser to the refrigeration unit. After connecting the system is filled with a water glycol solution that will operate in both summer and winter conditions. The multi-fix condenser can be positioned either within an area that will benefit from heat input or externally. The unit can be floor or wall mounted.
In addition the equipment benefits the environment by utilising a very small Porkka Remote Heat Disposal System (RHDS®) refrigerant charge and reducing running costs.
Air-cooled condenser dust filter
The air inlet to the condenser is on the lower part of the refrigeration unit, ensuring the coolest air is always used, helping to reduce running costs and extending the service life of the unit. The dust filter behind the air grill is easy to clean or replace. The controller provides information on when the filter requires cleaning or changing.
Liquid-cooled Modular Rooms (WHE)
Standard Room refrigeration units can be equipped with the liquid cooler and the released heat can be recycled in property systems. The liquid-cooler system is environmentally friendly and quiet.